ZXMSG 5200 (V2.0) Technical Manual
26 Confidential and Proprietary Information of ZTE CORPORATION
Rack Parameters
The ZXMSG 5200 can be installed in an indoor or outdoor type rack. The
indoor model is ZXA10-ONUB-IN/1500. The outdoor model is ZXONU-
OUT30 or ZXONU-OUT40.
The working parameters for the ZXA10-ONUB-IN/1500 are as follows:
DC voltage: -57 V DC ~ -40 V DC
AC power supply: 200 V AC ~ 240 V AC
Power consumption (full load): About 700 W
Working humidity: 20% ~ 80%
Working temperature: 0ºC ~ +40ºC
Waterproof and dustproof requirements: IP 5.5 level of the
International Electrotechnical Commission (IEC).
Internal battery: Four pieces of 12 V 100 Ah batteries
Rack weight: About 210 kg (without batteries)
The working parameters for the ZXONU-OUT30 are as follows:
AC power supply: 200 V AC ~ 240 V AC
DC voltage: -56 V DC ~ -40 V DC
Power consumption: 350 W (maximum equipment power in the
cabinet) + 1500 W (power of air conditioners).
Working temperature: -35ºC ~ +55ºC
Relative humidity: 5% ~ 90%
Temperature control solution: To use industrial air conditioner
Waterproof and dustproof requirements: IP 5.5 level of the
International Electrotechnical Commission (IEC).
Internal battery: Four pieces of 12V 100 Ah batteries
Rack weight: About 320kg (without batteries and air conditioner)
The working parameters for the ZXONU-OUT40 are as follows:
AC power supply: 200 V AC ~ 240 V AC
DC voltage: -56 V DC ~ -40 V DC
Power consumption: 430 W (maximum equipment power in the
cabinet) + 1500 W (power of air conditioners).
Working temperature: The normal working temperature should be
within -35ºC ~ +50ºC (with the consideration of sunny radiation).
No more than 4 hours’ operation under the maximum temperature
+55ºC.
Relative humidity: 5% ~ 90%
Temperature control solution: To use industrial air conditioner or heat
exchanger
To Next Page
Loading...
