Zte ZXR10 2928E - Table 2-1 Common Command Parameters; Usage of Command Line

ZXR102900ESeriesCongurationGuide
Table2-1CommonCommandParameters
ParameterDescription
<portlist>Portnumber,portnameorportnumberrangeseparatedbya
comma,forexample:
l1,2,4-8,18
lp1,pp2,4-8,port18
p1,pp2,port18aretheportnamesthatuserscreate.
AddtheslotIDbeforetheportIDofthedevicessupportinga
daughtercard,forexample,fortheZXR102928E-PSdevice:
l1/1,1/2,1/4-8,1/18
l2/1,2/2
<vlanlist>VLANID,VLANnameorVLANrangeseparatedbyacomma,
forexample:
l1-19,77,88,100-900
lvlan1,v1,10,100-200
<trunklist>TrunkIDortrunkrangeseparatedbyacomma,forexample,
1-5,7,10
<portname>Aportnumberorportnamecanbeenteredonce
<vlanname>AVLANIDorVLANnamecanbeenteredonce
<trunkid>AtrunkIDcanbeenteredonce.
<HH.HH.HH.HH.HH.HH>MACaddress,suchas00.22.33.44.55.66
<A.B.C.D>IPaddress,suchas10.40.47.254
<A.B.C.D/M>IPaddressandmaskbit,Itmustbetheintegerfrom1to32,
suchas10.40.47.254/24
<string>Astringwithoutspaces
<mib-oid>Dotteddecimalwithvariablelengthsuchas1.3.6.2.19.2
<name>Name,astringwithoutspaces
<sessionlist>Sessionlist
2.4UsageofCommandLine
OnlineHelp
Inanycommandmode,enteraquestionmark(?)behindtheDOSpromptofthesystem,
alistofavailablecommandsinthecommandmodewillappear.Youcanusetheonline
helptogetkeywordsandparameterlistofanycommand.
1.Inanycommandmode,enteraquestionmark"?"behindtheDOSpromptofthe
system,andalistofallcommandsinthemodeandthebriefdescriptionofthe
commandswillappear.Forexample:
2-12
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential