Zte ZXR10 2928E - Figure 4-6 MLD Snooping Configuration Instance

Chapter4ServiceConguration
CommandFunction
zte(cfg)#setmldsnoopingquery-response-interval<1000-25000>
Setstheintervalforsendingreport
packets.
zte(cfg)#setmldsnoopinglast-member-query<1-25>
Setsthetimetowaitingforaquery
responsewhenthelastmemberleaves.
zte(cfg)#setmldsnoopingqueryvlan<vlanlist>{enable|disable}
Enablesordisablesthequeryfunction
inaspecicVLAN.
zte(cfg)#setmldsnoopingqueryversion{v1|v2}SetstheMLDversionofquerypackets.
zte(cfg)#setmldsnoopingquery{enable|disable}Enablesordisablesthequeryfunction.
zte(cfg)#setmldsnoopingfastleave{enable|disable}
Enablesordisablesthefastleave
function.
zte(cfg)#setmldsnoopingrobustness<1-7>SetstheMLDrobustnessvalue.
showmldsnooping(allcongurationmodes)
DisplaysglobalMLDsnooping
congurationinformation.
showmldsnoopingvlan<1-4094>[group<ipv6-address>|port-info|
group-source-filter|host-source-filter](allcongurationmodes)
DisplaystheMLDsnoopingresult.
showmldsnoopingmr-port-info(allcongurationmodes)DisplaysMLDrouterportinformation.
MLDSnoopingCongurationInstance
lCongurationDescription
AsshowninFigure4-6,Ports1,Port3andPort5areconnectedtohosts,Port10is
connectedtoarouter,ports10,1,3and5areinVLAN200,usersconnectedtoPorts
1,3and5sendmulticastjoinrequeststojointhegroupsff1e::22andff1e::11.Enable
theMLDsnoopingfunctionontheswitchanddisplaythesnoopingresult.
Figure4-6MLDSnoopingCongurationInstance
4-25
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential