Zte ZXR10 5250-28TC - GARP;GVRP Configuration

ZXR105250SeriesCongurationGuide
CommandFunction
zte(cfg)#setntptimezone<(-12)-(+13)>SetsNTPtime-zone.
zte(cfg)#setntp{enable|disable}EnablesordisablesNTP .
zte(cfg)#setntpsrc-udp-port{123|1000}SetstheIDoftheudpportthrough
whichNTPmessagesaresent.
showntp(allcongurationmodes)DisplaysNTPconguration.
NTPCongurationInstance
lCongurationDescription
SupposethattheswitchandNTPserver1(IPaddressis202.10.10.10)andNTP
server2(IPaddressis201.10.10.10)implementtimesynchronization.Makesure
thattheswitchandNTPservercanpingeachothersuccessfully.TheNTPmoduleis
conguredasfollows:
lCongurationProcedure
zte(cfg)#setntpserver202.10.10.10
zte(cfg)#setntpsecond-server201.10.10.10
zte(cfg)#setntpenable
lCongurationVerication
zte(cfg)#showntp
ntpprotocolisenable
ntpserveraddress:202.10.10.10
ntpsourceaddress:None
ntpsourceudpport:1000
ntpis_synchronizedforsecondserver:Yes
ntprcvstratum:16
noreferenceclock.
ntptimezone:0
Inthedisplayedinformation,“ntpis_synchronizedforsecondserver”meansthe
currentswitchtimeissynchronizedwiththatoftheserver2.
5.26GARP/GVRPConguration
GARP/GVRPOverview
TheGenericAttributeRegistrationProtocol(GARP)isatypeofgenericattribute
registrationprotocol,whichdistributesVLANandmulticastMACaddressdynamicallyto
thememberinthesameswitchingnetworkbyapplyingthedifferentapplicationprotocols.
GARPVLANRegistrationProtocol(GVRP)isatypeofapplicationprotocoldened
bytheGARP ,whichmaintainsVLANinformationintheswitchdynamicallybased
ontheGARPprotocolmechanism.AllswitchessupportingGVRPcanreceivethe
VLANregistrationinformationfromotherswitchesandupdatelocalVLANregistration
5-92
SJ-20131111172707-002|2013-11-27(R1.0)ZTEProprietaryandCondential