Zte ZXV10 W300 - Encapsulation

Chapter 2 - Product Installation
 nrtVBR: It is for connections that have variable traffic, do not require
precise timing, but still require a set bandwidth availability. PCR, SCR and
MBS must all be set for nrtVBR.
The PVCs Summary button opens a new window that displays the current
PVC settings, as shown in Figure 8.
F I G U R E 8 T H E P V C S U M M A R Y T A B L E
Encapsulation
Four ISP connection modes can be selected according to requirement.
 Dynamic IP Address: Choose this option to obtain an IP address
automatically from the ISP.
 Static IP Address: Choose this option to set static IP information provided
by the ISP.
 PPPoE/PPPoA: Choose this option if the ISP uses PPPoE/PPPoA.
 Bridge Mode: Choose this option if the ISP uses bridge mode.
Dy nam ic IP add res s
Figure 9 shows the dynamic IP address parameters on the web configuration
page and Table 8 gives the descriptions of the parameters.
Proprietary Information of ZTE CORPORATION 19