ZXV10 W300 (V5.2) Wireless ADSL Router Maintenance Manual
T A B L E 1 5 T H E A C C E S S P O I N T PA R A M E T E R S
Parameter Description
Access Point By default, it is activated. If there is no wireless device in the
network, select Deactivated.
Channel Select a channel from the dropdown list.
Beacon Interval A beacon is a packet broadcasted by the router to synchronize
the wireless network. Enter a value between 20 and 1000.
RTS/CTS
Threshold
The RTS (Request To Send) threshold for enabling RTS/CTS
handshake. Enter a value between 1500 and 2347.
Fragmentation
Threshold
The maximum fragment size that can be sent. Enter a value
between 256 and 2346.
DTIM Enter a value between 1 and 255. It indicates the interval of eh
Delivery Traffic Indication Message (DTIM).
802.11 b/g/n The default setting is 802.11 b+g+n. other modes can be
selected from the dropdown list.
Station Number Enter a value between 0 and 16
Multiple SSIDs Settings
The SSID is the name of a wireless access point to be distinguished from
another. It is case sensitive and must not exceed 32 characters. User can set
multiple SSIDs for W300. Table 16 describes the parameters.
T A B L E 1 6 T H E M U L T I P L E S S I D S P A R A M E T E R S
Parameter Description
SSID Index Select an index number from the dropdown list.
SSID Enter the SSID name.
Broadcast SSID Select No to hide the SSID in so that a station cannot obtain the
SSID through passive scanning; select Yes to make the SSID
visible so that a station can obtain the SSID through passive
scanning.
Authentication
Type
Select the authentication type from the dropdown list.
28 Proprietary Information of ZTE CORPORATION
To Next Page
Loading...
