Zte ZXV10 W300 - 4.6 Wireless Security Setup

ZXV10 W300 (V5.2) Wireless ADSL Router Maintenance Manual
F I G U R E 9 D Y N A M I C I P A D D R E S S PA R A M E T E R S
T A B L E 8 T H E D E S C R I P T I O N S O F T H E D Y N A M I C I P A D D R E S S PA R A M E T E R S
Parameter Description
Encapsulation
Select the encapsulation type from the dropdown list
NAT
Select whether NAT is enabled or disabled
Default Route Select whether this PVC will be the default route for the Internet
data
Dynamic Route
Select the RIP type and direction from the dropdown lists
Multicast
Select the multicast protocol to be used from the dropdown list
St atic IP Addre ss
Figure 10 shows the static IP address parameters on the web configuration
page and Table 9 gives the parameter descriptions.
F I G U R E 1 0 S T A T I C I P A D D R E S S P A R A M E T E R S
20 Proprietary Information of ZTE CORPORATION