Chapter 2 - Product Installation
F I G U R E 3 2 T H E F I R M W A R E C O N F I G U R A T I O N PA G E
SysRestart Configuration
The SysRestart configuration page is used to determine whether the
current setting or the factory default setting to be loaded after the W300
router restarting. Click the RESTART button to restart the W300 router.
F I G U R E 3 3 T H E S Y S T E M RE S T A R T C O N F I G U R A T I O N P A G E
Diagnostics
The performance of the virtual circuits can be tested through the Diagnostics
page, as shown in Figure 34. Select a PVC from the dropdown list and the
corresponding testing result will be displayed.
Proprietary Information of ZTE CORPORATION 49
To Next Page
Loading...
