- 18 -
C141500900.fm
User's manualAMBROGIO 3000
GB
7-Connect the base to the trans-
former by plugging in the con-
nectors.
8-Insert the power supply cable
plug (C) in the wall socket.
Now the lawn mower is ready to
be programmed at desired times
and modes.
DESCRIPTION OF KEYBOARD CONTROLS
OPERATING INSTRUCTIONS
IDM - 41500900300.tif
plug (C)
IDM - 41500300400.tif
PAUSE: press to stop the lawn mower,
the display is in “stand-by”; it is now possi-
ble to program the lawn mower. When
pressed again, the lawn mower resumes
working. If the key is pressed during bat-
tery recharging, the lawn mower does
not resume working until the key is
pressed again and 'Pause' disappears
from the display.
Key (+): when working, press to restart the previously
stopped blade. When programming press to increase
the items indicated by the menu.
Display: shows all functions.
Key (-): when working, press to stop the
blade. When programming press to
decrease items indicated by the menu.
ENTER: when working, press to start the spi-
ral function. When programming press to
confirm and save the selection performed.
ON: press to turn on the lawn mower.
CHARGE: press to bring the lawn mow-
er back to the base and recharge the
battery in advance. If the key is pressed
while the lawn mower is recharging, re-
charging is interrupted and the lawn
mower resumes working.
OFF/STOP: press to stop the lawn
mower; the display turns off.
To Next Page
Loading...
Need help?
General