- 23 -
C141500900.fm
User's manualAMBROGIO 3000
GB
3-Access the menu and select NO
at the perimeter item (p.
26).
4-Press ENTER and the lawn
mower will start the working
cycle.
Danger - Attention
This operation must be per-
formed under operator control
who must create an obstacle
every time the lawn mower
should change direction. Do not
use feet to create an obstacle.
PROGRAMMING PROCEDURES
Lawn mower use can be easily personal-
ized following the procedures shown be-
low.
The CASCADE menu allows language
selection, date and time setting, lawn
mower work programming and second-
ary area management.
The menu consists of the following op-
tions:
–SET LANGUAGE (p. 24)
– SET DATE AND TIME (p. 24)
–SET WORKING SCHEDULE (p. 24)
This setting allows working hours to
be set during the day and working
days during the week.
– SET SECONDARY AREAS (p. 25)
This option allows automatic mowing
management of one or two second-
ary areas in the garden.
–SET PERIMETER (p. 26)
This option allows to set the machine
functionning by perimeter cable or by
collision.
– SET PASSWORD (p. 26)
This option allows a personalized
password to be defined, that, in case
of theft, will prevent the lawn mower
from being used.
– SET RAIN SENSORS (p. 26)
To access the menu press the keys
sequentially.
After entering the desired value,
press ENTER and press PAUSE.
Important
If STOP is pressed instead of PAUSE,
all values set will be cancelled.
IDM - 41500904100.tif
To Next Page
Loading...
Need help?
General