- 31 -
C141500900.fm
User's manualAMBROGIO 3000
GB
3-Connect the black connector
(C) with negative polarity (-)
and the red connector (D)
with positive polarity (+) to the
corresponding knobs.
Note: If the operation is not performed
within 30 seconds from the operations
described in point 2, the machine auto-
matically turns off. Restart from point 2
and repeat the procedure.
4-The writing on the display:
Ensures correct connector connections.
The yellow power led must blink or stay
on.
Important
Periodically check the machine during re-
charging. If the power supply is interrupt-
ed for a long period of time, the machine
automatically turns off and the ON key
must be pressed again.
5-To disconnect the machine from the
winter recharge, press OFF and dis-
connect connectors (C) and (D).
WINTER RECHARGING
PROBLEMS, CAUSES, SOLUTIONS
The following is a list of problems that
may occur during standard use of the
mower.
If the solutions described do not solve
the problem, contact the Service Centre.
TROUBLE SHOOTING
PROBLEM CAUSE REMEDY
The display shows
“NO Signal”
Incorrect connection of the
perimeter cable to the base.
Verify the connection of the
perimeter cable or the plug
connection to the base, Control
that the transformer green light
blinks, if it doesn't there is an
interruption in the perimeter cable.
Verify the integrity of the perimeter
cable.
Interruption of perimeter cable.
The lawn mower leaves
the working area
Excessive ground slope.
Verify the ground slope and if
necessary border the area.
Perimeter cable incorrectly
placed.
Verify the cable placing.
Interference caused by metallic
objects.
Correctly place the perimeter
cable.
IDM - 415009001000.tif
red
connector (D)
black connector (C)
To Next Page
Loading...
Need help?
General