- 32 -
C141500900.fm
User's manualAMBROGIO 3000
GB
The lawn mower doesn't
correctly return to the
recharging base.
The transformer cable has been
placed incorrectly or the
perimeter cable passes near the
base.
Stretch the transformer cable or
move the perimeter cable away
from the recharging base.
The lawn mower behaves
abnormally around the
flower beds.
The perimeter cable has been
incorrectly placed.
Invert the rotating direction around
the flower bed.Counter clockwise
Working area not
completely mowed
Insufficient working hours. Extend the working hours.
Working area too wide.
Limit working area or extend
working hours.
Obstructed cutting disc.
Control that the cutting disk rotates
freely.
Worn cutting blades. Replace cutting disk.
The mower does not
work enough with
respect to the
set time.
Clocks incorrectly set. Set the lawn mower clock correctly.
Working schedule set incorrectly. Set working schedule correctly.
The lawn mower works
less that the time set
Batteries are worn or not
correctly recharged.
Replace batteries (write the
number of cycles and total working
hours in the manual). Recharge
batteries for at least 12 hours
leaving the machine set to PAUSE
on the recharging base
Secondary area not
completely mowed
Incorrect programming.
Correctly program secondary
area..
The machine doesn't
perform the rapid return
or doesn't reach the
recharging base
Rapid return incorrectly set.
Control the exact settings for the
rapid return.
The lawn mower doesn't
reach secondary areas
Incorrect programming.
Control the number of cycles and
the crossing time.
Rapid return to recharging base.
Calculate time correctly keeping in
mind the rapid return to recharging
base (see p. 25).
PROBLEM CAUSE REMEDY
To Previous Page
Loading...
Need help?
General