- 26 -
C141500900.fm
User's manualAMBROGIO 3000
GB
Set Perimeter
1-Press ENTER.
The display shows:
2-Program the type of perimeter installed
in the area to be mowed.
Select YES if perimeter cable has
been installed.
Select NO if perimeter cable has not
been installed.
Select ×2 if there are signal prob-
lems (perimeter cable mounted).
Select ×4 if the problem is not re-
solved with option ×2.
Select ×6 if the problem is not re-
solved with option ×4.
Important
When the mower is turned on it auto-
matically sets in Perimeter Yes mode.
Options NO, ×2, ×4, ×6 are deactivat-
ed when the mower is turned off. Use
them with extreme caution only in the
event there are no pools or slanted ar-
eas.
3-Press (+) Key and (-) Key to modify.
4-Press ENTER to save the program.
Set Password
1-Press ENTER.
The display shows:
The lawn mower can
be protected by a pass-
word made of four digits that the user
may personalize following the instruc-
tions below.
The password set by default is 0000; it's
advisable to enter four numbers that
can be easily remembered (ex: birth
date)
2-Press (+) Key and (-) Key to enter
YES
3-Press ENTER to save the program.
The display shows:
4-Enter the old password selecting eve-
ry single digit with ENTER and modi-
fying values with (+) Key and (-) Key.
5-Press ENTER to save the program.
6-Press ENTER.
The display shows:
7-Enter the new password using EN-
TER (+) Key and (-) Key.
8-Press ENTER to save the program.
The display shows:
9-Enter new password again.
10-Press ENTER to permanently save.
Set Rain Sensors
(for the DELUXE model only)
1-Press ENTER.
The display shows:
2-Press (+) Key and (-) Key to set the
rain sensor
Select YES to activate the rain con-
trol
Select NO to ignore the rain control
BORDER
YES
Change password
NO
PASSWORD
0000
New password
2705
Repeat password
2705
RAIN
YES
To Next Page
Loading...
Need help?
General