• API Settings
Using the API interface to realize features such as device linkage, call control, relay
control, and play sound by the systems.
Note: Authentication and encryption are not used in the API interface, so please
pay attention to the security of the network environment when opening and
using these API interfaces.
Multicast
The multicast settings are used to configure the parameter settings of the multicast function
on the SIP Safety Intercom. It can configure to monitor up to 9 different levels of multicast
addresses, the audio streams with a higher priority will interrupt the playback of the lower
priority audio streams.
Please go to Advance Settings -> Multicast Settings.
To Next Page
Loading...
