ZyXEL Communications Dimension GS-3012 - Password Commands

Ethernet Switch CLI Reference Guide
141
CHAPTER 41
Password Commands
Use these commands to configure passwords for specific privilege levels on the Switch.
41.1 Command Summary
The following section lists the commands for this feature.
41.2 Command Examples
See Section 2.1.3.2 on page 16.
Table 93 password Command Summary
COMMAND DESCRIPTION M P
admin-password <pw-string>
<confirm-string>
Changes the administrator password.
pw-string: 1-32 alphanumeric characters
confirm-string: 1-32 alphanumeric characters
C14
password <password> [privilege
<0-14>]
Changes the password for the highest privilege level or,
optionally, the specified privilege.
password: 1-32 alphanumeric characters
C14
no password privilege <0-14> Clears the password for the specified privilege level and
prevents users from entering the specified privilege level.
C14