Ethernet Switch CLI Reference Guide
147
CHAPTER 43
Policy Commands
Use these commands to configure policies based on the classification of traffic flows. A
classifier distinguishes traffic into flows based on the configured criteria. A policy rule defines
the treatment of a traffic flow.
" Configure classifiers before you configure policies. See Chapter 9 on page 45
for more information on classifiers.
43.1 Command Summary
The following section lists the commands for this feature.
Table 96 policy Command Summary
COMMAND DESCRIPTION M P
show policy Displays all policy related information. E 3
show policy <name> Displays the specified policy related information. E 3
To Next Page
Loading...
