Chapter 44 Port Security Commands
Ethernet Switch CLI Reference Guide
152
44.2 Command Examples
This example enables port security on port 1 and limits the number of learned MAC addresses
to 5.
sysname# configure
sysname(config)# port-security
sysname(config)# port-security 1
sysname(config)# no port-security 1 learn inactive
sysname(config)# port-security 1 address-limit 5
sysname(config)# exit
sysname# show port-security 1
Port Security Active : YES
Port Active Address Learning Limited Number of Learned MAC Address
01 Y Y 5
To Next Page
Loading...
