Chapter 6 ARP Inspection Commands
Ethernet Switch CLI Reference Guide
35
Rate (pps) This field displays the maximum number for DHCP packets that the switch
receives from each port each second. The switch discards any additional
DHCP packets.
Burst Interval This field displays the length of time over which the rate of ARP packets is
monitored for each port. For example, if the Rate is 15 pps and the burst
interval is 1 second, then the switch accepts a maximum of 15 ARP packets
in every one-second interval. If the burst interval is 5 seconds, then the
switch accepts a maximum of 75 ARP packets in every five-second interval.
Table 20 show arp inspection interface port-channel (continued)
LABEL DESCRIPTION
To Next Page
Loading...
