ZyXEL Communications Dimension GS-3012 - Page 47

Chapter 9 Classifier Commands
Ethernet Switch CLI Reference Guide
47
9.2 Command Examples
This example creates a classifier for packets with a VLAN ID of 3. The resulting traffic flow is
identified by the name VLAN3. The policy command can use the name VLAN3 to apply
policy rules to this traffic flow.
sysname# config
sysname(config)# classifier VLAN3 vlan 3
sysname(config)# exit
sysname# show classifier
Index Active Name Rule
1 Yes VLAN3 VLAN = 3;