10
5.3. Logging in to the Web Configurator
Perform the following steps to log in to the Web Configurator:
1. Make sure that the Zyxel device is on, the Power LED is solid green, and you are
connected to the Zyxel WiFi network.
2. Launch your web browser. If the Zyxel device does not automatically direct you to
the login screen, go to http://192.168.1.1.
3. On the Login screen, select your preferred language from the drop-down menu in
the top right corner.
4. When logging in for the first time, type in the default user name admin and the
login password that is available on the device label. If you have already changed
your password, enter your new password into the password field.
5. Click Login. When logging in for the first time, a Password Reset screen comes up.
Enter a new password and retype it to confirm. The password must contain at least
one numeric character and one alphanumeric character. Then click Change password.
NOTE You can bypass this step by clicking Skip.
To Next Page
Loading...
