24
PIN Configuration
Perform the following steps to set up a PIN configuration:
1. Turn on the WiFi on your wireless device.
2. Open the WiFi settings and select WPS PIN Entry to get a PIN.
3. In the Web Configurator, select Network Settings > Wireless > WPS.
4. Click the WPS toggle button to enable the WPS function.
5. Click Apply to save the changes.
6. Under Method 2, enter the PIN from your wireless device.
7. Click Register.
8. Activate the WPS function on the wireless client utility screen within two minutes.
Then the Zyxel device authenticates the wireless device and sends the configuration
settings to the wireless device, which may take up to two minutes. Your wireless
device is then able to communicate with the Zyxel device securely.
5.7. Configuring the Firewall
The firewall protects your devices and network from unauthorized access by hackers
on the Internet. By default, the firewall allows trac that originates from your LAN
computers to go to all other networks, and blocks trac that originates from other
networks. You can configure the level of security you want to apply to your network.
A higher security level means restrictions to the internet activities you want to perform.
Perform the following steps to configure the firewall:
1. Go to Security > Firewall > General.
To Next Page
Loading...
