22
2. To change the wireless network name, go to Wireless Network Settings and enter
the name in the Wireless Network Name field.
3. To set the security level, go to Security Level and select More Secure.
4. Select WPA2-PSK from the Security Mode drop-down menu.
5. To change the WiFi password, enter a new password into the password field. The
password must be 8-63 ASCII characters or 64 hexadecimal digits (“0-9”, “A-F”).
This password is required when you connect your wireless device to the WiFi.
6. Click Apply to save the changes.
7. Go to the Others tab and make sure the 802.11b/g/n Mixed is selected in the
802.11 Mode drop-down menu.
8. Click Apply to save the changes.
5.6.1 Setting up a Secure Wireless Network Using WPS
The Zyxel device supports WiFi Protected Setup (WPS) that allows you to create
a wireless network with strong security.
There are two methods for creating a secure connection using WPS:
• Push-Button Configuration (PBC)
It enables you to create a secure wireless network by simply pressing a button.
• PIN Configuration
It enables you to create a secure wireless network by entering a wireless client’s
PIN in the Web Configurator. This is a more secure method because one device
can authenticate the other.
NOTE Your device must support WPS to use this feature
To Next Page
Loading...
