33
Enable Busy Forward
Select it if you want the Zyxel device to forward incoming calls to
the specified phone number if the phone port is busy. Specify the
phone number in the To Number field on the right. If you have call
waiting, the incoming call is forwarded to the specified phone
number if you reject or ignore the second incoming call.
Enable No Answer Forward
Select it if you want the Zyxel device to forward incoming calls
to the specified phone number if the call is unanswered. See
No Answer Time below. Specify the phone number in the To
Number field on the right.
No Answer Time
This field is used by the Active No Answer Forward feature. Enter
the number of seconds the Zyxel device should wait for you to
answer an incoming call before it considers the call unanswered.
Enable Do Not Disturb Select it to set your phone not to ring when someone calls you.
Active Incoming Anonymous
Call Block
Select it if you do not want the phone to ring when someone
tries to call you with caller ID deactivated.
Enable MWI
Select it if you want to hear a waiting (beeping) dial tone on
your phone when you have at least one voice message. Your
VoIP service provider must support this feature.
MWI Subscribe Expiration Time
Keep the default value of this field unless the VoIP provider tells
you to change it. Enter the number of seconds the SIP server
should provide the message waiting service each time the Zyxel
device subscribes to the service. Before this time passes, the
Zyxel device automatically subscribes again.
Hot Line/Warm Line Number
Select it to enable the hot line or warm line feature on
the Zyxel device.
Hot Line
Select it to have the Zyxel device dial the specified hot line
number immediately when you pick up the telephone.
Warm Line
Select it to have the Zyxel device dial the specified warm line
number after you pick up the telephone and do not press any
keys on the keypad for a period.
Hot Line/Warm Line Number
Enter the number of the hot line or warm line you want the Zyxel
device to dial.
Warm Line Timer
Enter the number of seconds the Zyxel device should wait be-
fore dialling the warm line number if you pick up the telephone
and do no press any keys on the keypad.
Enable Missed Call Email
Notification
Select it to have the Zyxel device email you a notification when
there is a missed call.
Mail Account
Select a mail account for the email address specified. If you select
None, email notifications will not be sent via email. You must
already have an email account on the Email notification screen.
Send Notification to Email
Select it to get notifications to the email address specified in this
field. If this field is blank, notifications will not be sent via email.
Missed Call Email Title
Type a title that you want to have in the subject line of the
email notification the Zyxel device sends.
4. Click OK to save the changes.
To Next Page
Loading...
