ZyXEL Communications EX3510-B1 - Page 205

Chapter 16 Firewall
EX3510-B1 User’s Guide
205
Figure 128 Access Control: Add/Edit
The following table describes the labels in this screen.
Table 82 Access Control: Add/Edit
LABEL DESCRIPTION
Active Slide this switch to activate the Access Control List rule.
Filter Name Enter a descriptive name of up to 16 alphanumeric characters, not including spaces,
underscores, and dashes.
You must enter the filter name to add an ACL rule. This field is read-only if you are editing the
ACL rule.
Order Select the order of the ACL rule.
Select Source IP
Address
Select the source device to which the ACL rule applies. If you select Specific IP Address, enter
the source IP address in the field below.
Source IP
Address
Enter the source IP address.