Chapter 4 Tutorials
EX3510-B1 User’s Guide
49
Note: The Guest SSID (Wireless Network Name) depends on the state of the Main SSID. For
example, when the 2.4GHz Main SSID is enabled, then the 2.4GHz Guest SSID can be
enabled. But when the 2.4GHz Main SSID is disabled, then the 2.4GHz Guest SSID is
automatically disabled (cannot be enabled by the user).
4 In the Guest/More AP screen, click the Edit icon to configure the third wireless network group. Configure
the screen using the provided parameters and click Apply.
5 Check the status of VIP and Guest in the Guest/More AP screen. The yellow bulbs signify that the SSIDs
are active and ready for wireless access.
To Next Page
Loading...
