Chapter 2 Hardware Installation and Connection
GS1100 Series User’s Guide
13
Table 2 GS1100 Series Installation Comparison Table
For GS1100-10HP, GS1100-16 and GS110-24E, you can place the Switch directly on top of your desk or
have it wall-mounted. For GS1100-16, GS1100-24E and GS110-24, the size is suitable for rack-mounting
and you can refer to Section 2.5 on page 16 for instruction. Take note of the following:
• The Switch should be placed on a desk that has a level surface and that is able to support the weight
of the Switch.
To start using it, simply connect the power cables and turn on the Switch.
2.3 Desktop Installation Procedure
1 Make sure the Switch is clean and dry.
2 Remove the adhesive backing from the rubber feet.
3 Attach the rubber feet to each corner on the bottom of the Switch. These rubber feet help protect the
Switch from shock or vibration and ensure space between devices when stacking.
Figure 4 Attaching Rubber Feet
4 Set the Switch on a smooth, level surface strong enough to support the weight of the Switch and the
connected cables. Make sure there is a power outlet nearby.
Cautions:
• Avoid stacking fanless Switches to prevent overheating.
• Ensure enough clearance around the Switch to allow air circulation for cooling.
• Do NOT remove the rubber feet as it provides space for air circulation.
MODEL FEATURE GS1100-10HP GS1100-16 GS1100-24E GS1100-24
Desktop Device
Wall-mountable
Rack-mountable
To Next Page
Loading...
