Chapter 2 Hardware Installation and Connection
GS1100 Series User’s Guide
16
WARNING! The Switch should be wall-mounted horizontally, and make sure
the front panel is facing down. The Switch's side panels with ventilation slots
should not be facing up or down as this position is less safe.
2.5 Rack Mounting
The Switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other
equipment (see Table 1 on page 8). Follow the steps below to mount your Switch on a standard EIA rack
using a rack-mounting kit.
Note: Make sure there is enough clearance between each equipment on the rack for air
circulation.
2.5.1 Installation Requirements
• Two mounting brackets.
To Next Page
Loading...
