ZyXEL Communications GS1100 Series - Wall Mounting; Installation Requirements

Chapter 2 Hardware Installation and Connection
GS1100 Series User’s Guide
14
2.4 Wall Mounting
The Switch can be mounted on a wall (see Table 1 on page 8). You may need screw anchors if
mounting on a concrete or brick wall.
Do the following to attach your Switch to a wall.
See Table 3 on page 14 for how far apart to place the screws.
2.4.1 Installation Requirements
• Distance above the floor: At least 1.8 m (5.9 feet)
• Two M4 screws and a #2 Philips screwdriver
• Two screw anchors (optional)
Figure 5 GS1100-10HP screw specs
Table 3 Distance between the centers of the holes for wall mounting
MODEL DISTANCE
GS1100-10HP 176mm
GS1100-16 148 mm
GS1100-24E 120 mm