Chapter 4 Troubleshooting
GS1100 Series User’s Guide
30
Too many hubs
between the
computers in the
network
Too many hubs (or repeaters) between the connected computers in the network may increase
the number of network collision or other network problems. Remove unnecessary hubs from the
network.
A loop in the
data path
A data path loop forms when there is more than one path or route between two networked
computers. This results in broadcast storms that will severely affect your network performance.
Make sure there are no loops in your network topology.
Figure 22 Troubleshooting Improper Network Cabling and Topology
PROBLEM CORRECTIVE ACTION
To Next Page
Loading...
