Chapter 8 Basic Setting
GS2210 Series User’s Guide
77
Click the PoE Time Range Status link in the Basic Setting > PoE Status screen. The following
screen opens.
Figure 56 Basic Setting > PoE Setup > PoE Time Range Status
The following table describes the labels in this screen.
8.8.2 PoE Setup
Use this screen to set the priority levels, power-up mode and schedule for the Switch in distributing
power to PDs.
Click the PoE Setup link in the Basic Setting > PoE Status screen. The following screen opens.
Table 18 Basic Setting > PoE Setup > PoE Time Range Status
LABEL DESCRIPTION
Port This is the number of the port on the Switch.
Tim e Range This field displays the name of the schedule which is applied to the port. PoE is enabled at the
specified time/ date.
state This field displays whether the port can receive power from the Switch (I n) or not (Out)
currently.
It shows - if there is no schedule applied to the port.
To Next Page
Loading...
