ZyXEL Communications MGS3520 Series - Supported Mibs; SNMP Traps

Chapter 42 Access Control
MGS3520 Series User’s Guide
350
42.3.2 Supported MIBs
MIBs let administrators collect statistics and monitor status and performance.
The Switch supports the following MIBs:
• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1493 Bridge MIBs
• RFC 1643 Ethernet MIBs
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• SNMPv2, SNMPv2c or later version, compliant with RFC 2011 SNMPv2 MIB for IP, RFC 2012
SNMPv2 MIB for TCP, RFC 2013 SNMPv2 MIB for UDP
42.3.3 SNMP Traps
The Switch sends traps to an SNMP manager when an event occurs. The following tables outline the
SNMP traps by category.
An OID (Object ID) that begins with “1.3.6.1.4.1.890.1.15” is defined in private MIBs. Otherwise,
it is a standard MIB OID.
Table 173 SNMP System Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
coldstart coldStart 1.3.6.1.6.3.1.1.5.1 This trap is sent when the Switch is
turned on.
warmstart warmStart 1.3.6.1.6.3.1.1.5.2 This trap is sent when the Switch
restarts.
fanspeed zyHwMonitorFanSpeedOut
OfRange
1.3.6.1.4.1.890.1.15.3.26.2.1 This trap is sent when the fan speed goes
above or below the normal operating
range.
zyHwMonitorFANSpeedOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.3.26.2.6 This trap is sent when the fan speed is
recovered from the out of range to
normal operating range.