Chapter 13 App Center and Packages
NAS Series User’s Guide
230
13.9 pyLoad
Use this screen to configure the NAS so you can use pyLoad to manage your downloads, including
those from one-click hosting sites.
Click pyLoad on the Desktop or the Launch button in the App Center screen to open the following
screen.
Figure 185 pyLoad
The following table describes the labels in this screen.
Table 130 Applications > pyLoad
LABEL DESCRIPTION
Get Started This is available only when you select Enable pyLoad and click Apply.
Click this button to go to the pyLoad management login screen.
Enable pyLoad Select this to have the NAS manage your downloads. Clear it to turn the feature off.
Username Only the admin account can log into the pyLoad management screen.
Password You can configure a separate password for using the admin account to access the NAS’s
pyLoad management screen.
Password (Confirm) Type the same password again to make sure you entered it correctly.
Port Number Set the pyLoad management page’s port number. The range of valid port numbers is
1024~65536. Include this port number after the IP address when manually entering the
pyLoad management login page’s address in your browser’s address bar. For example,
192.168.1.2:7272.
Apply Click this to save your changes.
Reset Click this to restore the screen’s last-saved settings.
To Next Page
Loading...
