Chapter 13 App Center and Packages
NAS Series User’s Guide
232
The following table describes the labels in this screen.
13.10.2 Memopal Settings
Use this screen to enable and configure Memopal backup settings. Click Memopal > Settings on the
Desktop to open the following screen.
Table 131 Memopal > Status
LABEL DESCRIPTION
Status This shows the status of the Memopal application’s interaction with the Memopal server.
Disabled: The NAS Memopal application is turned off.
Starting: The backup job is initializing and the NAS is getting ready to back up.
Running: The backup job is executing.
Stopped: The backup job is stopped. This may be due to a network error, remote server
error, or other issue.
Completed: The backup job finished.
To Backup The number of files remaining to back up.
Backed up The number of files backed up already.
Failures The number of files the NAS failed to back up to the Memopal server.
Upload Speed This is how fast in Bytes per second the NAS is backing up to the Memopal server.
Progress This shows the percentage of the files already backed up from the total files to be backed
up.
Restart Backup This button is available only when you enable Memopal in the Memopal > Settings screen.
Click this to re-scan all files and perform a backup.
Retry Failures This button is available only when you enable Memopal in the Memopal > Settings screen.
Click this to only re-scan and back up files the NAS failed to back up.
Backup Report This button is available only when you enable Memopal in the Memopal > Settings screen.
Click this to display backup record details.
To Next Page
Loading...
