Chapter 7 Storage
NSA210 User’s Guide
148
You see a warning screen before you delete a volume.
Figure 47 Delete a Volume Warning Screen
7.4.1 Creating a SATA Volume
Note: An eSATA hard disk is required in order to create a SATA volume. Otherwise,
the NSA shows an error “No disk is available for creating new volume.” The
SATA hard disk is configured as a JBOD volume by default.
File System This field displays the file system that an external (USB) volume
is using.
Disk(s) Click or roll your mouse over a link in this column to display the
following details about the hard drive located in the
corresponding hard drive bay.
Type: Whether it is an internal or external (USB) hard drive.
Model Name: This is the hard disk number that identifies the
disk.
File System: The file system that an external volume is using
Capacity: The total storage space on the disk.
Capacity This field shows total disk size, the percentage of the volume
being used and the percentage that is available.
Actions This field displays icons allowing you to edit, scan, repair or
delete a volume. You can also locate or eject an external
volume.
Note: If you delete a volume, all data in the volume disk(s) is
erased.
Table 19 Storage > Volume (continued)
LABEL DESCRIPTION
To Next Page
Loading...
