Chapter 3 Web Configurator Basics
NSA210 User’s Guide
40
3.2.1 Access the NSA Via NAS Starter Utility
If you don’t know the IP address of the NSA, then use the NAS Starter Utility to
find it. Refer to the Quick Start Guide for how to install and run the NAS Starter
Utility. See Chapter 2 on page 29 for more information on the NAS Starter Utility.
Figure 11 NAS Starter Utility Main Screen
From the NAS Starter Utility main page click an icon under Admin to see the web
configurator’s login screen.
3.2.2 Web Browser Access
Note: You can access the NSA using your web browser only after the hard disk in the
NSA has been “initialized” using the NAS Starter Utility (see Chapter 2 on page
29).
Configure the server name of your NSA using the Network Configuration screen
(Section 2.6 on page 34) of the NAS Starter Utility. Open your browser and type in
the server name of the NSA (“nsa210” by default).
Figure 12 NSA URL
To Next Page
Loading...
