Chapter 15 Maintenance Screens
NSA210 User’s Guide
306
15.3 The Power Management Screen
Use this screen to manage power settings for the NSA, including power saving,
UPS, power on/off during power failure and power on/off schedule.
Click Maintenance > Power Management to display the following screen.
Figure 143 Maintenance > Power Management
The following table describes the labels in this screen.
Table 95 Maintenance > Power Management
LABEL DESCRIPTION
Power Management
Turn off hard
disk(s)
Enter the number of minutes the NSA will sit idle before spinning the
hard disks down to sleep. The default power-off time is 3 minutes.
Apply Click this to save your changes in this section.
Reset Click this to restore your previously saved settings.
Minimum UPS Capacity
To Next Page
Loading...
