Chapter 3 Web Configurator Basics
NSA210 User’s Guide
51
• Unicode is supported for share names, although your FTP client must support
UTF-8. Full support should be available in all Windows versions after Windows
2000.
3.5.6 Password Screen
Click Password to open the following screen. Use this screen to change an
account’s password. Enter a new password and confirm it by re-entering it.
Figure 21 Password
The following table describes the labels in this screen.
Table 11 Password
LABEL DESCRIPTION
Account Name Type the user name of the account for which you want to change
the password.
Old Password Type the user’s current password.
New Password Create a new password for the user. You can type from one to
14 single-byte (no Chinese characters allowed for example)
ASCII characters.
Password (Confirm) You must type the exact same password that you just typed in
the above field.
Apply Click this to save your changes.
Reset Click this to refresh the screen.
To Next Page
Loading...
