ZyXEL Communications P-2601HN-F1 Series User Manual

6
Internet Access Setup
The DSL and INTERNET lights are on if you have internet access. Open
your web browser and browse to http://www.zyxel.com
. You may be
prompted to enter your username and password.
If one or both of these lights are not on, try turning the P-2601HN(L)-F1
Series off, check the connections, wait a few seconds and then turn it
back on. If the DSL light is not on, contact your service provider. If the
DSL light is on but the INTERNET light is not, you need to enter your
Internet access configuration using the Web Configurator - see page 9.
Setting Up a Wireless Connection
If you want to set up a wireless connection using the P-2601HN(L)-F1
Series, use one of the following methods:
1. Use the wireless SSID (network name) and WPA-PSK encryption
key if the device does not have the WPS logo - see page 7.
2. Use the WIRELESS button if your wireless device has a Wi-Fi
Protected Setup (WPS) logo - see page 8.

ZyXEL Communications P-2601HN-F1 Series Specifications

General

Brand	ZyXEL Communications
Model	P-2601HN-F1 Series
Category	Wireless Router
Language	English