P-660 Series Support Notes
3. Delete items from the auto-haunting preconfigured table by useing CI command:
wan atm vchunt remove <remote node> <vpi> <vci>
5. The usage command argument is listed below suggest to use 3f which include
all PPP possiblities.
Command Description
wan atm vchunt
Add <remoteNodeIndex>
<vpi> <vci> <service
bit(hex)>
Add a entry to hunting pool
<remote node> : input the
remote node index 1-8
<vpi> : vpi value
<vci> : vci value
<service>: it’s a hex value,
bit0:PPPoE/VC (1),
bit1:PPPoE/LLC (2) ,
bit2:PPPoA/VC (4),
bit3:PPPoA/LLC (8),
96
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
