Chapter 16 802.1Q
P-79X Series User’s Guide
165
16.2.1 Editing 802.1Q Group Setting
Use this screen to configure the settings for each VLAN group.
In the 802.1Q screen, click the Edit button from the Modify filed to display the following screen.
Figure 99 Advanced > 802.1Q > Group Setting > Edit
The following table describes the labels in this screen.
16.3 The 802.1Q Port Setting Screen
Use this screen to configure the PVID. Click Advanced > 802.1Q > Port Setting to display the
following screen.
Table 65 Advanced > 802.1Q > Group Setting > Edit
LABEL DESCRIPTION
Name Enter a descriptive name for the VLAN group for identification purposes. The text
may consist of up to 8 letters, numerals, “-”, “_” and “@”.
VLAN ID Assign a VLAN ID for the VLAN group. The valid VID range is between 1 and
4094.
Ports This field displays the types of ports available to join the VLAN group.
Control Select Fixed for the port to be a permanent member of the VLAN group.
Select Forbidden if you want to prohibit the port from joining the VLAN group.
Tx Tag Select Tx Tagging if you want the port to tag all outgoing traffic trasmitted
through this VLAN. You select this if you want to create VLANs across different
devices and not just the P-79X.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
