P-79X Series User’s Guide
181
CHAPTER 19
Remote Management
19.1 Overview
Remote management allows you to determine which services/protocols can access which P-79X
interface (if any) from which computers.
The following figure shows remote management of the P-79X coming in from the WAN.
Figure 110 Remote Management From the WAN
Note: When you configure remote management to allow management from the WAN, you
still need to configure a firewall rule to allow access.
You may manage your P-79X from a remote location via:
• Internet (WAN only)
•LAN only
•ALL (WAN and LAN)
• None (Disable)
To Next Page
Loading...
