Chapter 5 Tutorials
P-79X Series User’s Guide
43
Figure 26 WAN > Internet Connection > Service Type of C
5.3.3 Connect the P-79Xs
Connect the DSL ports on the P-79Xs together, and wait while the P-79Xs automatically establish
the connection. Make sure that the Y-cable is connected to the proper DSL outlets. The Y-cable
connector marked DSL1 must be connected to the outgoing DSL 1 telephone jack and the Y-cable
connector marked DSL2 must be connected to the outgoing DSL 2 telephone jack.
When the connection is established, the DSL1, DSL2, and INTERNET lights turn on. It takes up to
half a minute to establish the connection. If the P-79Xs do not establish the connection, verify that
the settings are correct.
To Next Page
Loading...
