Chapter 20 Universal Plug-and-Play (UPnP)
P-79X Series User’s Guide
195
Networking Services
6 Click OK to go back to the Windows Optional Networking Component Wizard window and
click Next.
20.4 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the P-79X.
Make sure the computer is connected to a LAN port of the P-79X. Turn on your computer and the P-
79X.
Auto-discover Your UPnP-enabled Network Device
1 Click Start and Control Panel. Double-click Network Connections. An icon displays under
Internet Gateway.
2 Right-click the icon and select Properties.
To Next Page
Loading...
