Chapter 17 Quality of Service (QoS)
P-79X Series User’s Guide
173
Figure 108 Advanced > QoS > Class Setup: Edit
See Appendix F on page 279 for a list of commonly-used services. The following table describes the
labels in this screen.
Table 69 Advanced > QoS > Class Setup: Edit
LABEL DESCRIPTION
Class Configuration
Active Select the check box to enable this classifier.
Name The text may consist of up to 20 letters, numerals and any printable character
found on a typical English language keyboard.
Interface Select from which interface traffic of this class should come.
Priority Select a priority level (between 0 and 7) or select Auto to have the P-79X map
the matched traffic to a queue according to the internal QoS mapping table.
See Section 17.4.4 on page 177 for more information.
"0" is the lowest priority level and "7" is the highest.
To Next Page
Loading...
