Chapter 23 Tools
P-79X Series User’s Guide
227
Figure 132 Configuration Upload Successful
The P-79X automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 133 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
Appendix C on page 244 for details on how to set up your computer’s IP address.
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the P-79X to
its factory defaults. The following warning screen appears.
Figure 134 Reset Warning Message
Figure 135 Reset In Process Message
To Next Page
Loading...
