Chapter 2 Introducing the Web Configurator
P-79X Series User’s Guide
23
Address
Mapping
Use this screen to configure network address translation
mapping rules.
This screen appears when you choose Full Feature from the
NAT > General screen.
ALG Use this screen to enable or disable SIP ALG.
Security
Firewall General Use this screen to activate/deactivate the firewall and the
default action to take on network traffic going in specific
directions.
Rules This screen shows a summary of the firewall rules, and allows
you to edit/add a firewall rule.
Threshold Use this screen to configure the thresholds for determining
when to drop sessions that do not become fully established.
URL Blocking Keyword Use this screen to block access to web sites containing certain
keywords in the URL.
Schedule Use this screen to set the days and times for the P-79X to
perform content filtering.
Trusted Use this screen to exclude a range of users on the LAN from
content filtering on your P-79X.
Packet Filter Packet Filter Use this screen to configure the rules for protocol and generic
filter sets.
VPN Setup Use this screen to configure each VPN tunnel.
Monitor Use this screen to look at the current status of each VPN
tunnel.
Certificates Trusted CAs Use this screen to import CA certificates to the P-79X.
Advanced
Static Route Static Route Use this screen to configure IP static routes to tell your P-79X
about networks beyond the directly connected remote nodes.
802.1Q
Group Setting Use this screen to activate 802.1Q, specify the management
VLAN group, display the VLAN groups and configure the
settings for each VLAN group.
Port Setting Use this screen to configure the PVID.
QoS General Use this screen to enable QoS and traffic prioritizing, and
configure bandwidth management on the WAN.
Class Setup
Use this screen to define a classifier.
Dynamic
DNS
Dynamic DNS This screen allows you to use a static hostname alias for a
dynamic IP address.
Table 6 Navigation Panel Summary
LINK TAB FUNCTION
To Next Page
Loading...
