Chapter 2 RESET/ENCRYPT Button
PLA6456 User’s Guide
14
Figure 5 Two Separate HomeGrid Networks
If the Powerline ( ) lights on both PLAs do not light up, the PLAs are not connected. Repeat the
connection process, making certain you press the RESET/ENCRYPT buttons for the correct time
and within two minutes of each other. If that does not work see Section 5.4 on page 36 for
suggestions.
See Troubleshooting in Chapter 5 on page 36 for suggestions on problems with the RESET/ENCRYPT
button and the lights.
To Next Page
Loading...
