ZyXEL Communications PMG1005-T20B - 2.2.1 Title Bar; 2.2.2 Navigation Panel

Chapter 2 The Web Configurator
PMG1005-T20B User’s Guide
13
Figure 6 Main Screen
• A - title bar
• B - navigation panel
• C - main window
2.2.1 Title Bar
Click Logout to log out of the Web Configurator.
2.2.2 Navigation Panel
The following table describes the menu items on the navigation panel.
B
C
A
Table 4 Navigation Panel Summary
LINK TAB FUNCTION
Interface
Setup
LAN Use this screen to configure your GPON Device’s LAN IP address and subnet
mask.
Access
Management
Auth Use this screen to change your GPON Device’s Subscriber Location ID (SLID)
setting. The SLID identifies your device to the GPON service provider.
Maintenance Administration Use this screen to change your GPON Device’s password.
Firmware Use this screen to upload firmware to your GPON Device.
SysRestart Use this screen to keep your GPON Device’s configuration (settings) after reboot
or reset the factory default settings.