Chapter 1 Introduction
PMG1005-T20B User’s Guide
7
1.4 Hardware
1.4.1 Front Panel
The following graphic displays the front panel of the GPON Device.
Figure 2 Front Panel
1.4.2 LEDs (Lights)
The following graphic displays the labels of the LEDs.
None of the LEDs are on if the GPON Device is not receiving power.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
POWER Green On The GPON Device is receiving power and is ready for use.
Off The GPON Device is not receiving power.
PON Green On The GPON Device has successful fiber link.
Blinking The GPON Device’s PON port is syncing with OLT (fiber terminal).
Off The GPON Device’s PON port is not connected.
LOS Red On The GPON Device is not receiving an optical signal.
Blinking The GPON Device is receiving a weak optical signal.
Off The GPON Device is receiving a normal optical signal.
LAN Green On The GPON Device has an Ethernet connection on the Local Area Network
(LAN).
Blinking The GPON Device is transmitting/receiving data on the Ethernet .
Off The GPON Device does not have an Ethernet connection on the LAN.
To Next Page
Loading...
