7
If the main screen does not display, make sure your
computer is set to get an IP address automatically from a
DHCP server.
Click Quick Setup from the main screen. Follow the instructions in
the screen and enter the Internet access information exactly as given
to you by your ISP and click Apply.
3. If your ISP didn’t provide you a username and password, click the
Advanced IP Configuration button. Configure your Q1000Z for
Internet access according to instructions provided by your ISP. Make
sure you enter the correct information.
When your Internet connection is set up correctly, the DSL and
INTERNET lights should be green.
To Next Page
Loading...
